The only one I've seen broke are non ***'s. I did have problems with those also. I know run a off the shelf bolt and do not hot load.curly - the slot is the vent for the gas hole. there is a dimple that the spring catches to keep it from moving forward, in either position.
frank - i don't think you understand. i don't want to clean or oil it. i just want to stuff it with hot loads and kill kill kill
gilly - i've heard of bolts breaking but i've never seen one. probably just internet lore
dirtydawg - it's becoming more clear to me each day why you're the boss
takko - ding ding ding we have a WINNER
curlee - i want you to get your kemah kallege diploma and march right in to the dean's office, hand it over and tell him djones said you are entitled to a full refundTake a BFH (Big %#%#%#%#%# Hammer) But seriously looks like the wire is wore the heck out and you need a whole new setup. Like I said with your wealth I personally would have 4 or 5 for back up!! BANG BANG!!
spring is still stiff. the dimple is beveled. should have been designed with a slightly rounded notch where you have to pull spring down to remove the knob. with knob off, looks like it just blows gas out the hole like it was in the 'suppressed' position.You wore out the doohicky that retains the hoodus. You should replace the whatchamacallit so the thing-a-majig won't fall off. See problem fixed. That will be $99.99 for the repair instructions. Please remit in the form of a USPS money order to quit_breaking_stuff@sum_ting_wong.com
Bad luck DJ. Does it still function if it falls off? Looks like the retaining spring is wore out, but I don't know much about the LWRC piston setup.
DANG IT MAN!!!! I plead the FIFF!! Siven yers at a for yer college and you say I did not git my mony worf!?? BANG BANG!!curlee - i want you to get your kemah kallege diploma and march right in to the dean's office, hand it over and tell him djones said you are entitled to a full refund
I actually told them not to send you anything this time. One rifle bad design maybe bad luck, two rifles really bad luck, all three rifles since you have been posting here fall apart along with everything else mounted to them. It's obviously the loose nut behind the trigger!spring is still stiff. the dimple is beveled. should have been designed with a slightly rounded notch where you have to pull spring down to remove the knob. with knob off, looks like it just blows gas out the hole like it was in the 'suppressed' position.
strawdog is having his pimp, lwrc, send me a complete replacement doohicky at no cost. good thing too cuz i don't do usps mo, only ppal. if they don't come thru... again... i'll just wrap it with the hazard zone yellow and black tape with a sign that says 'caution, falling parts'
u shud ov gone two one of dem der hi fallutin kolleges like a&mDANG IT MAN!!!! I plead the FIFF!! Siven yers at a for yer college and you say I did not git my mony worf!?? BANG BANG!!
uhh ohh. me tinks i poked da sleeping bearI actually told them not to send you anything this time. One rifle bad design maybe bad luck, two rifles really bad luck, all three rifles since you have been posting here fall apart along with everything else mounted to them. It's obviously the loose nut behind the trigger!
DANG IT MAN!!!! I plead the FIFF!! Siven yers at a for yer college and you say I did not git my mony worf!?? BANG BANG!!
I'm glad my photo is not out there as much as his. LOLlawblog, i think it's pretty crappy now that you've got big time sponsors that you've forgotten all the little people who helped make it possible. just because you're a supermodel for pinkpony magazine is no reason to turn your back on your friends.
View attachment 4949
UPDATE...I actually told them not to send you anything this time. One rifle bad design maybe bad luck, two rifles really bad luck, all three rifles since you have been posting here fall apart along with everything else mounted to them. It's obviously the loose nut behind the trigger!