Sounds good, I won't worry about whether the scope is set at 100 or 50 yds but focus on where the POI is at the various yardages. I saw that Brian had a video showing him zeroing at 50 yds but the scope was set to 100 (seen as A100 in the display I believe) so I was curious if there is a wrong way of zeroing the Trail scopes. Will play around a bit and see what I end up with. Merry Christmas to you all when it gets here and thanks for the help!
Okay, I see where you are having issues. My scope was not set at 100 yards. That isn't a setting. It is a name of the Profile being used, only. It doesn't matter what you call it. It has no impact on where the gun shoots. You can change the number without changing the POI. It is not part of an automated ballistic calculator.
I had plans to zero at 100 yards and then found that the steel targets at 100 were all about the same temperature as the background and did not stand out as well as the target at 50 and so I used the target at 50. It didn't dawn on me to change the profile name. My apologies.
The purpose of the profile naming aspect is to serve as a reminder as to which profile you are on and for what distance you may have zeroed the scope for that profile.