260lb Hulk Took One In The Cranium

[437]

Boxed Ammo not hand loads
Hornady 123gr SST @ 2180 FPS
1150 ft.lbf under 50 yards
(How I intend to use it.)
1000 ft.lbf @ 125 yards
(Which I have no intention in ever shooting)

I replayed some of my ammo testing video.
What I’ve concluded is my cold bore zero is 4-8” left. When I did my 2 shot test. They stacked right on top of each other.
Going out Friday to test my theory. So stay tuned.

I have absolute confidence in the SSTs at 50 yards and under.

Did you add the pistol video later? I swear the first time I watched it was only the Creedmoor shot I must be losing my mind. Don't know if your rifle will eat steel reliably, but the Wolf 123 SP's have gone 14 for 14 DRT on the spot for my buddy and I out of 16". I'd send ya a couple of boxes to play with if I didn't have to use UPS of FedEx too dang expensive for $8 bucks of ammo.

 

[Wildfowler]

Were you able to get out and check your 762? Inquiring minds want to know.

 

[ZenArchery]

Yep. Cold bore zero was left 3.25”.
Let it cool down for 15 minutes.
Took another shot. Dang near put it in same hole.
Adjusted zero. Took shot. Good.
Took 3 quick follow up shots. Opened up 2.5” right.

I just need to get some copper down the barrel and think it will equalize.

 

[ScottJ]

Yep. Cold bore zero was left 3.25”.
Let it cool down for 15 minutes.
Took another shot. Dang near put it in same hole.
Adjusted zero. Took shot. Good.
Took 3 quick follow up shots. Opened up 2.5” right.

I just need to get some copper down the barrel and think it will equalize.

Almost 6" of shift? Is that at 50 yards? It's good you're checking it out. Are you sure nothing is loose with the scope or barrel nut? I noticed with my XD38A that I got much better repeatable accuracy by using the 1/2" wrench to snug down the mount nuts instead of just "as tight as I can possibly get with my fingers" kind of tight. Cool vids!